Connection blocks with the possibility of sealing

Rail terminal RS 4-16/4 and RSB 4-16/4

IMG_4582
IMG_4400

Code / 22050
Code / 22051

Regular terminals RS 4-16 / 4 and RSB 4-16 / 4, 500 V, 110 ° C for difficult operating conditions
Purpose
– Primarily, the advantage and purpose of regular RSB-type terminals is the ability to seal through the lid in the cabinets of measuring points in civil engineering from one to three meters.

– The purpose of the terminals RS 4-16 and RS 4-16 / 3 × 16 is not limited in terms of the power terminal for all types of any industrial cabinets or any type of equipment that contains power supply.

Technical characteristics
1. RS 4-16 / 4 and RSB 4-16 / 4 series terminals are made of premium imported plastics that have insulation properties and high temperature resistance, above the characteristics of previously used materials (110 ° C without deformation). The material “NORYL” SEO, “GE” Plastic category of Self-adhesive “V °” material is used.

2. Contacts are made of MS-rail smoke. 8 × 11 and galvanic protected RS-RS-4-16 / 4-type and RS-profiles 18X11 are also galvanically protected for RS 4-16 / 3X16 terminals.

3. The screws on terminal terminals are according to YUS MB1-111.Zn. and each contact is loaded with two screws.

4. This construction avoided a short joining with the help of classic bridges, thus avoiding one weak spot on the clamp.

5. Short circuit is achieved by a compact bus (MS-18 × 11) with one input 16 mm2 and three 16 mm2 outputs for each phase, especially as for zero (N), for RS-type terminals 4 -16 / 3 × 16.

6. In the clamp housing on the underside, a clamping mechanism for the clamp on DIN 35 rail is applied.

7. Blum cover is made of transparent LEXAN manufacturer of “GE-Plastik” category of self-extinguishing “V °”.

8. The RS and RSB 4-16 terminals, as well as the RS 4-16 / 3 × 16 and RSB 4-16 / 3 × 16 terminals, can be attached (with the help of their own tail) if necessary one or more poles (for grounding) terminals RS 4-16 / 1.
9. This new design eliminates many defects that existed with previously applied terminals such as a RNSS 4-16-type terminal and others.

The certification was performed by the Electrotechnical Institute “Nikola Tesla” in Belgrade. Attest no. 50150. Protection was performed by the Federal Institute for Patents in Belgrade. Patent no. MP 339/01.


Rail terminal RS 4-16/3×16 and RSB 4-16/3×16

Code / 22052
Code / 22053

Regular terminals RS 4-16 / 3 × 16 and RSB 4-16 / 3 × 16 500 V, 110 ° C for difficult operating conditions
Technical characteristics
– The materials installed in this terminal do not differ from the basic terminal type RS (B) 4-16 / 4.
– This construction is avoided by short joining with conventional bridges, thus avoiding a weak point on the clamp.
– The hub is made of a compact brass rail (galvanic zinc plated).
– The type RSB 4-16 / 3 × 16 has the ability to seal with a cover made of transparetic polycarbonate self-adhesive.

Purpose
– For supplying measuring points up to three meters, as well as for all types of industrial cabinets, such as power terminals for multiple consumer groups.



Rail terminal RS 35/2×16 and RSB 35/2×16

Code / 22054
Code / 22055

Regular terminals RS 35/2 × 16 and RSB 35/2 × 16, 500 V, 110 ° C
for difficult working conditions
Purpose
– Primarily, the advantage and purpose of regular RSB / 35 type terminals is the possibility of blombing through the lid in the cabinets of measuring points in the low-rise buildings of two to six meters.

– The purpose of the RS and RSB / 35 type terminals is not limited in terms of the power terminal for all types of any industrial cabinets or any type of equipment that contains power supply.

Technical characteristics
1. The RS-35 / 2X16 and RS (B) 35 / 6X16 type terminal blocks are made of premium imported plastic weights that have insulation properties as well as high temperature resistance, above the characteristics of previously used materials (110 ° C without deformation ). The material “NORYL” SEO, “GE” Plastic category of Self-adhesive “V °” material is used.

2. The contacts are made of compact brass rail 14X16 mm for the regular terminal RS (B) 35 / 2X16 and a brass rail 14X34 mm for the regular terminal RS (B) 35 / 6X16 (4X16). All rails are galvanically protected.

3. The screws on terminal terminals are according to YUS MB1-111.Zn. and each contact is loaded with two screws.

4. This construction avoided a short joining with the help of classic bridges, thus avoiding one weak spot on the clamp.

5. Short joining is achieved by a compact brass rail (galvanically protected), and this is 14X16 for RS (B) 35 / 2X16, 14X34 terminal for RS (B) 35 / 6X16 (4X16) terminal.

6. In the clamp housing on the underside, a clamping mechanism for the clamp on DIN 35 rail is applied.

7. Blum cover is made of a transparent LEXAN manufacturer of “GE-Plastik” self-extinguishing category “V °”.

8. RS-232 and RSB / 35-type terminals can be attached (with the help of their own tail), if necessary, one or more poles (for grounding) of the terminal type RS 4-16 / 1.

9. With this new design, many defects that existed in the applied clamps (such as the RNSS 4-16-type terminal) and others have been eliminated.

The certification was carried out by the Nikola Tesla Electrotechnical Institute in Belgrade. Attest no. 50917, 50918.

Protection was performed by: Federal Institute for Patents in Belgrade. Patent no. MP 339/01.


Rail terminal RS 35/4×16 and RSB 35/4×16

Code / 22056
Code / 22057

Regular terminals RS 35/4 × 16 and RSB 35/4 × 16, 500 V, 110 ° C
for difficult working conditions
Technical characteristics
– The materials installed in this terminal do not differ from those incorporated in the basic RS (B) type 35/2 × 16.
– This construction avoided a short-circuit with the help of classic bridges, thus avoiding a weak point on the clamp.
– This hub is made of a compact brass rail which is galvanized zinc plated.
– RSB 35/4 × 16 type has the capability of sealing with a cover made of
transparent self-extinguishing polycarbonate “Vo”.

Purpose
– For supplying measuring cabinets up to four meters, as well as for all types of industrial cabinets, as terminals for multiple consumer groups (up to 4).



Rail terminal RS 35/6×16 and RSB 35/6×16

Code / 22058
Code / 22059

Regular terminals RS 35/6 × 16 and RSB 35/6 × 16, 500 V, 110 ° C
for difficult working conditions
Technical characteristics
– The materials installed in this terminal do not differ from those incorporated in the basic RS (B) type 35/2 × 16.
– This construction avoided a short-circuit with the help of classic bridges, thus avoiding a weak point on the clamp.
– This hub is made of a compact brass rail which is galvanized zinc plated.
– The type RS (B) 35/6 × 16 has the ability to seal using a lid made of transparent self-adhesive polycarbonate “Vo”.

Purpose
– For supplying the measuring cabinets up to six meters, as well as for all types of industrial cabinets as a power terminal for multiple consumer groups (up to 6).